STB SYSTEMS, INC. GRAPHIX PLUS II Card Type Multi-I/O Video Processor 6845 Maximum Onboard Memory 32KB DRAM I/O Options SASI/SCSI connector, clock/calendar, light pen port, parallel port, video port (3), RF modulator connector Data Bus 8-bit ISA Video Types Supported Monochrome/CGA Highest Resolution 640 x 350 Supported Hard Drives Supported Up to 7 SASI or SCSI devices [Image] CONNECTIONS Function Label Function Label Parallel or SASI/SCSI port J1 Light pen port J5 Test connector J2 CGA video out J6 1.5V AA battery connector J3 Composite video out J7 RF modulator connector J4 Monochrome video out J8 USER CONFIGURABLE SETTINGS Setting Label Position » J1 is a parallel port SW1/1 Off J1 is a SASI/SCSI port SW1/1 On » Automatically detect the adapter type SW1/4 On being used by software Send all video signals to the monochrome SW1/4 Off monitor » Monochrome video disabled when SW1/5 On monochrome monitor is off or not connected Monochrome video enabled even when no SW1/5 Off monitor is available » Red signal sent to monochrome display SW1/6 On Red not signal sent to monochrome SW1/6 Off display » Green signal sent to monochrome display SW1/7 On Green not signal sent to monochrome SW1/7 Off display » Blue signal sent to monochrome display SW1/8 On Blue not signal sent to monochrome SW1/8 Off display MONITOR TYPE SELECTION Setting SW1/2 SW1/3 » Card acts as both monochrome Off Off and color displays Card acts as monochrome display Off On only Card acts as color display only On Off Card behaves like Graphix Plus On On card in monochrome graphics mode